Over powered popye hydro
Had this popyee hydro hull for 7 years never seen the water
Thinking of trying something different
Turnigy T600 1400kv motor on a 5100 Dinigy 6s pack
What's your thoughts and a setup need to buy an esc what Amp esc would be recommended for this motor? Also need a few props size choices
4s would be more suitable but I can't get the cog. right with a 4s setup
But the T600 I have already
Would be happy with around 50mph if I can keep in the water
COG is around 1.5 inches from the rear of the sponsons with the T600 motor and the 6s1p.
Motor is set back allowing the COG
Last edited by sampit; 01-26-2020 at 10:07 AM.
FC Cheetah TP4092 1600KV Dinogy 6s2p,Etti Envoy WE 3s, Rico Mono 31" T600 1400kv Dinogy 5100mAh 65c 6s1p
Popeye Hydro T600 1400kv 6s1p
Bookmarks