Saw mono's tend to crash pretty hard so a couple recommendations.
-use 2 part 4lb foam in the nose to add flotation and strength.
-Make sure the hatch is reinforced and has pins of some type of secondary securing device like thumb screws. Also add some flotation to the cowl.
-Make sure you use stout hardware on the back.
-Buy several additional rudder blades, they tend to bend in most crashes.
-Make sure the hull and hardware will float with the cowl off.
-Scuff the bottom with 400grit sandpaper.
-Use a very secure battery mounting system. In crashes it is very common for the batteries to come loose and often hit the cowl popping it open.
Tyler Garrard
NAMBA 639/IMPBA 20525
T-Hydro @ 142.94mph former WR
Bookmarks