Hey guys. We are in business again. Wood is back in stock! Taking orders for winter builds. Thanks.
Black Pearl II Hydro - 2020
Collapse
X
-
So finally got to do some test run on my p sport. But on last run I blew off and cracked the front deck. It run great on H7 prop. I was just pushing it too hard and trying to see what the limits were. I think also going to be ditching the castle Phoenix esc for castle x8.
So I need to fix that when I back from vacation.
Nortavlag Bulc
Comment
-
This is when I funked out and lost touch with the racing community. I'm doing the reading now to get back up to speed with you guys, so to say...
I'm looking forward to building a new P-Sport this winter. Thanks Pete, Terry, Don. All you guys are awesome and have been a great help getting me out of a near 3 year funk out. Larry and Steve Reesor are always a great asset as well, many thanks.
What is not race worthy is going to be sold shortly. Time to purge and update with just 3 or 4 boats. Cheers.Nortavlag Bulc
Comment
-
-
What are the largest packs you can put into the full P sport size hull? Max dimensions?Nortavlag Bulc
Comment
-
I'm guessing that is 2 part Klass Kote primer? TIA.Nortavlag Bulc
Comment
-
Comment
-
Comment
-
Titanium Turn Fins
I know that people are having problems bending the Stainless Turn Fins too easily in a flip or spin out. Me included.
Also Pete said that people are reducing the bend in the Stainless Turn Fins.
So I order some material$$. Bought a couple of Solid Carbide End Mills$$$, Made a set of Bending Dies. 2" diamiter to get a 1" radius for the hook.$$$$
Titanium turn fins for "P" or "Q" Sport Hydro's and Riggers.
These fins will fit;
"P" limited Sport Hydro's and Riggers
"P" Sport Hydro's and Rigger
"Q" Sport Hydro's and Rigger
Turn fin includes:
(1) Turn Fin, no bracket, no screws.
$50.00 Shipped to Lower 48 East of Mississippi, West of Mississippi add $3.00
Bent radius is a little less then a Stainless Turn Fin, seeing that most people including me
are reducing the bend on the Stainless fins.
The sharpened edge is machined at 7 degrees, making the machined edge 3/8" long.
These fins will not bend as ease either. It took a 12 ton Hydraulic press to do the hook in the fin. (1" Radius Not a straight bend.)
Fins are 0.065" thick Titanium, and lighter and much stronger then the Stainless fins of the same size.
Size:
3 3/8" Tall
2 7/16" Wide
3/4" Hook on a 1" Radius bend.
PM or E-Mail Me
Larry Jaques
AKA _ TRUCKPULLLast edited by TRUCKPULL; 12-15-2022, 05:32 PM.Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & WetComment
Comment