Results 1 to 4 of 4

Thread: MHZ Mystic 1380 Rear Motor Mount

  1. #1
    Join Date
    Jul 2019
    Location
    SC
    Posts
    51

    Lightbulb MHZ Mystic 1380 Rear Motor Mount

    Just wanted to see if anyone could help me out in getting 2 of these motor mounts 3D printed in some black PLA or ABS. Id be willing to pay for the printer filament,shipping, etc. I am still waiting to get a few more dimensions for the part but will be creating a .stl file that would be used for the print job (slicing software). If anyone thinks they could be willing to help let me know!motor mounts.pdf

  2. #2
    Join Date
    Apr 2007
    Location
    ma
    Posts
    8,617

    Default

    Try this place
    https://all3dp.com/1/best-online-3d-...rint-services/

    There is also a member of the forum Mike Vigliotti that has been printing stuff for people.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

  3. #3
    Join Date
    Jul 2019
    Location
    SC
    Posts
    51

    Default

    Thanks Steven!

  4. #4
    Join Date
    Jul 2019
    Location
    SC
    Posts
    51

    Lightbulb .stl FILES FOR SHARING? PRINTING PLEASE

    I am attaching my .stl files for the rear motor mounts I am trying to get printed/ would care to share with anyone else. The mounts are for 56mm motors and incorporate a inner grove for a 56mmx2mm cross section o-ring for a snug fit and an external groove to run a ziptie around and close the top of the mount to the bottom with an adjustable mount pad angle that has holes for better epoxy bond. Let me know yalls thoughts. Still need to confirm overall height of mount.

    56 motor mount plate v1.stl56 motor mount top v1.stl56 motor mount bottom v1.stl

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •