Results 1 to 4 of 4

Thread: ZTW 200 & 300. Who has tried them?

  1. #1
    Join Date
    Mar 2009
    Location
    OH
    Posts
    1,580

    Default ZTW 200 & 300. Who has tried them?

    As the title says. Who has tried them what is there opinion? I tried both today in known set-ups. the 200 in a P cat with a lehner that has no issues with a 40-160 Schulze (I know it pulls about 180 amps and runs well and cool) We also tried the 300 in a big boat on 8s today. Known setup that runs a flier 400 cool as can be...Does not pull over 250 amps. Both the 200 and 300 shut down on at 3-4 laps. Overheated fail safe kicked in. IMO they work but they're not what they are rated for. Not even close.

  2. #2
    Join Date
    Oct 2017
    Location
    LS
    Posts
    103

    Default

    There is a Thread on the 300A one:
    https://forums.offshoreelectrics.com...ho-is-using-it
    Still the feedback is quite limited and does not encourage me to buy such an ESC.

  3. #3
    Join Date
    Mar 2009
    Location
    OH
    Posts
    1,580

    Default

    Quote Originally Posted by plinse View Post
    There is a Thread on the 300A one:
    https://forums.offshoreelectrics.com...ho-is-using-it
    Still the feedback is quite limited and does not encourage me to buy such an ESC.
    Not really helpful info. So no one has any real world experience with these?

  4. #4
    Join Date
    Aug 2018
    Location
    Ky
    Posts
    176

    Default

    I purchased the 200A model about two months ago. I have it in a Genesis with TP 4060 1650kv that runs 70 to 75 mph depending on prop. I can run it with 2 (3S) 5000 batteries for about 41/2 minutes to 5 minutes without any issues. ESC comes off the water around 118 degrees. Motor normally runs around 125 degrees.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •