Seaking 180 esc problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • waynek
    Junior Member
    • Sep 2019
    • 1

    #1

    Seaking 180 esc problems

    need some input on programing new performance set up from OSE, Seaking 180 esc, leopard 4082 x2 1600. I hooked up batteries and did a test, both steering and motor ran with the turn knob on Traxxas TQI. hooked up Hobbywing program card and set to the following #1 running mode =1 ,#2 lipo cells = 1, #3 low voltage = 5 3.4 cut off #4 timing 3 7.5. The turning works but there is zero response from motor? i Know the motor runs from the first test trial.

    thanks in advance
  • 785boats
    Wet Track Racing
    • Nov 2008
    • 3169

    #2
    Have you set the throttle range as per the instructions? I think that needs to be done for the ESC to recognise your throttle positions.
    See the danger. THEN DO IT ANYWAY!!!
    http://forums.offshoreelectrics.com/...hp?albumid=319
    http://forums.offshoreelectrics.com/...hp?albumid=320

    Comment

    Working...