Results 1 to 2 of 2

Thread: Seaking 180 esc problems

  1. #1
    Join Date
    Sep 2019
    Location
    oh
    Posts
    1

    Default Seaking 180 esc problems

    need some input on programing new performance set up from OSE, Seaking 180 esc, leopard 4082 x2 1600. I hooked up batteries and did a test, both steering and motor ran with the turn knob on Traxxas TQI. hooked up Hobbywing program card and set to the following #1 running mode =1 ,#2 lipo cells = 1, #3 low voltage = 5 3.4 cut off #4 timing 3 7.5. The turning works but there is zero response from motor? i Know the motor runs from the first test trial.

    thanks in advance

  2. #2
    Join Date
    Nov 2008
    Location
    Ql
    Posts
    3,030

    Default

    Have you set the throttle range as per the instructions? I think that needs to be done for the ESC to recognise your throttle positions.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •