Pro Boat UL-19 - One of a Kind with Upgrades

[Darin Jordan]

<<<SOLD>>>

This UL-19 hull was one of two test boats used during development of this package. As such, the hull is VERY nicely laid up and has very crisp, clean lines. This is the boat I've been posting updates on while I went through all the upgrades.

Hull was produced without the front canard wing, and was provided without decals, so everything is clean.

Upgrades include:

• OSE Carbon Fiber Interior Tray
• Spektrum S6030 Digital Hi-Torque Servo
• Removed Teflon and installed OSE .187" (3/16") Flexcable with long propshaft.
• Upgraded 5mm to .187" Coupler
• Mike Hughes Sport 21 Turn-Fin
• Shortened Rudder
• Reinforced hull in afterplane and Carbon Doublers added to Turn-Fin mounting area.
• 5.5mm Connectors on motor leads and battery leads.

Comes complete as shown with brand new Dynamite 2000KV 6-Pole UL-19 motor. Spektrum MR4000 RX shown is NOT included, but if you run Spektrum I can include that for an additional $35.00 (Retails for $79.95)

This boat is setup to the initial running setup that I normally start racing from, so it should go well right off the bench. Some minor adjustment of the turn-fin may be required to get the angle JUST right.

Boat will also come with the stock Stainless UL-19 prop, sharpened and ready to go.

Price:
$500 + $65.00 Shipping in the Con-USA, minus Spectrum MR4000 RX
Add $35.00 if you want the RX.

aUL19_005.JPGaUL19_004.JPGaUL19_003.JPGaUL19_001.JPGaUL19_002.JPG

[Darin Jordan]

Additional Pictures:

aUL19_010.JPGaUL19_009.JPGaUL19_008.JPGaUL19_007.JPGaUL19_006.JPG

[Darin Jordan]

More Pictures:

aUL19_014.JPGaUL19_015.JPGaUL19_013.JPGaUL19_012.JPGaUL19_011.JPG

[Darin Jordan]

A couple more shots:

aUL19_016.JPGaUL19_017.JPG

[nmnorth]

does it include esc?

[Darin Jordan]

Comes as pictured, minus the MR4000 receiver, unless you run Spektum and want it included as described in the add.

[Darin Jordan]

Package is SOLD (via Facebook) to a local club member.

Thanks for looking!