If this is your first visit, be sure to check out the FAQ by clicking the link above. To post questions and to view pictures, you will have to register by clicking here register : Important, Please make sure to add oseforum@offshoreelectrics.com to your safe senders email list. Otherwise the activation email may go in your spam box. Or to start viewing/reading the forum without having to register, select the forum that you want to visit from the selection below.

Welcome to The OffshoreElectrics (OSE) RC Electric Boating Forum!

Please take a moment to read this. OSE is a tight knit community of like minded rc boating enthusiasts who value "on topic" and clean discussions. You are currently viewing our forum as a "guest". A guest will not be able to post questions or view pictures and videos.

Registration is fast, simple and absolutely free. Please click here to Join now.

By joining our free community you will have access to post topics, create your own image gallery to share with everyone, communicate privately with other members (PM), respond to polls, upload content and access many other special features.

If you have any problems with the registration process or your account login, please contact us by clicking here.

Results 1 to 19 of 19

Thread: Why is Power cutting out at full throttle

Thread Tools
- Show Printable Version
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

08-17-2019, 08:09 AM #1
jmdmbsc

View Profile

View Forum Posts

Private Message

Junior Member
Join Date

Aug 2019

Location

SC

Posts

14
Why is Power cutting out at full throttle

Recently upgraded Traxxas M41 boat to leopard 4082 X2 2200Kv with Seaking ESC 180A running 6S. It runs fine, nothing gets hot but at full throttle power cuts off. I can continue running but again at full throttle, power cuts off. ESC is programmed for 6S, low voltage at 3.4 and timing is 0 degrees. Prop is copper 42mm x 63mm. Batteries are 5000MAh 50C in series. Boat runs fine with stock ESC & motor.

Last edited by jmdmbsc; 08-17-2019 at 08:22 AM.

Reply With Quote