As some of you may remember, the local council drained our clubs race lake & demolished the dam wall.

https://forums.offshoreelectrics.com...ad!&highlight=

We've had a few race meetings on the smaller "pond" with the 4s & 6s classes of Mono's, Sports Hydros, Cats, & riggers.
A couple of us tried out the big 1/8 scale Hydro's to see if it is still viable to race them.
So here's a test run of my U-95.
I normally run a 2 blade Prather s235 prop, but because of the tighter course I tried a CNC 4614/3 blade to try & pull out of the tighter turns a bit better.
This is a race simulation with one mill lap & 5 race laps & a wind down lap.
Just thought I'd share.