Help! I have several FE Boats. Recently, my UL19 and Sonic Wake reduced speed after a short lap. The Sonic Wake is stock. The UL19 has been modified with a new Sea King 180A ESC and the same motor that is in the Sonic Wake. I have only used 6S in the SW and 4S, 5S and 6S in the UL19. Both boats have been upgraded to dual water pickup rudders to improve cooling. The reason for the ESC and motor change on the UL19 was to improve cooling when using 6S. Using a program card I have gone through the setup of both ESC’s to try and eliminate the premature cutouts, with no success. My local hobby shop recommended that I used a additional capacitor plugged into tha aux port in the receiver in the SW. That did not help the condition either.
Can anyone shed light on what I have missed or failed to check?
Bookmarks