Results 1 to 5 of 5

Thread: what size leopard motor for a 1/8 scale hydro?

  1. Default what size leopard motor for a 1/8 scale hydro?

    new to 1/8 scale hydroplanes want to use a leopard motor have had good luck with them. what size should i use?

  2. #2

    Default

    Is this for racing, or sport running? It matters because of racing rules. Running 8S a Leopard 4092/700 Kv or a 5692/730 would work well for general use and give decent run time for most. Other motors and voltages are possible, depends on what you want.

    Speed?
    Run time?
    Budget?
    ERROR 604 - Caller's Buffer Is Too Small
    1. Ensure that your port is not configured to a mini plug
    2. If you are still having problems, contact someone

  3. Default

    I was thinking more of sport running. For now. Thank you for your reply. How many amp esc would work?

  4. #4

    Default

    For safety, minimum 200 amps.
    ERROR 604 - Caller's Buffer Is Too Small
    1. Ensure that your port is not configured to a mini plug
    2. If you are still having problems, contact someone

  5. Default

    Thank you!!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •