It is too bad the OP purchased before he got some answers. I know the desire to get started can be strong, but I see little use for what he has coming. The big cat probably won’t plane off with that motor on 6S, let alone on 3S. A prop much under ~48 mm won’t have the thrust available regardless of the rpm - don’t ask me how I know. 6S and 130 amps is only about 2500 usable watts and that’s max, not sustained. The motor is too small with inadequate torque and will overheat quickly. Most of the above would apply to the 42” mono. Even the 38” mono is too big for his motor.
There are some good recommendations above, but so much depends on what you expect. No one asked you about run time. The words “cheap” and “good run time” mean different things to different people, especially to someone unfamiliar with FE. I’m not trying to discourage the OP - I really appreciate his enthusiasm for the project - but he needs to understand the limitations as well as the advantages to FE power before he invests further.
.
ERROR 403 - This is not the page you are looking for
Bookmarks