Outboard Delta Force 26

[Qwik]

Ok so Im finishing up a build that might be a turd but I had the time and figured I’d try. I’ve put a HobbyKing 2630kv Outboard on a Delta Force 26 with a Seaking Pro 120a ESC. I had to build a Stand-Off Bracket to mount the motor to be able to gain trim and to allow the motor to clar the hull. I’m waiting for my through hull pick ups but because it’s an outboard and I’m running two pick ups does it matter what side of the hull they are installed? I know that on an inboard it’s best to put them on the rotation side of the motor/prop but I’ve never used an outboard. Also should I add Trim Tabs or try it first. Any suggestions besides scrapping the project would be great. Thanks