How to get ZTX Seal 200A esc to work with TP motors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave Rumble
    Member
    • Aug 2018
    • 84

    #1

    How to get ZTX Seal 200A esc to work with TP motors

    For some reason the seal 200a esc will not work with the tp motors. Works fine with every other type of motor that I have tried but not with TP
    If hooked up to T) motor the motor just vibrates a bit when you give it throttle.
  • LibertyMKiii
    Senior Member
    • Dec 2018
    • 127

    #2
    Originally posted by Dave Rumble
    For some reason the seal 200a esc will not work with the tp motors. Works fine with every other type of motor that I have tried but not with TP
    If hooked up to T) motor the motor just vibrates a bit when you give it throttle.
    I have to assume there is some internal issue with the TP Motor. It is setup like any other brushless motor. If other motors are working with the ESC then the ESC is good.

    -Liberty

    Comment

    • fweasel
      master of some
      • Jul 2016
      • 4285

      #3
      There were reported problems with the 300A ZTW ESC and some TP motors, I believe it was related to the number of poles. I suppose this is similar.

      https://forums.offshoreelectrics.com...ho-is-using-it
      Vac-U-Tug Jr (13mph)

      Comment

      • Dave Rumble
        Member
        • Aug 2018
        • 84

        #4
        The TP motors are new and run on both the T180 and with the Seaking 180 with no issues at all.

        Comment

        Working...