Results 1 to 4 of 4

Thread: Anyone have problems getting the flex shaft out of the proboat recoil 26

  1. #1

    Default Anyone have problems getting the flex shaft out of the proboat recoil 26

    Flexshaft is stuck won't come out but motor coupler spins putting trying to put on new coupler

  2. #2

    Default

    Quote Originally Posted by MARKBRENNAN View Post
    Flexshaft is stuck won't come out but motor coupler spins putting trying to put on new coupler
    the shafts get crushed by over tightening and bulge on the other side of the Ferrell inside the collect is usually what happens if you have enough room to take apart the collect you can try to spread the fingers on the Ferrell to pull the shaft out more then likely your shaft is shot also

  3. #3

    Default

    Quote Originally Posted by dasboata View Post
    the shafts get crushed by over tightening and bulge on the other side of the Ferrell inside the collect is usually what happens if you have enough room to take apart the collect you can try to spread the fingers on the Ferrell to pull the shaft out more then likely your shaft is shot also
    What is the Ferrell?

  4. #4

    Cool

    I think he meant to say ferrule, but he really means collet. The collet is the part which contracts and squeezes the cable. A soft cable and/or over-tightening can deform the cable making it difficult to remove.

    This is a collet:
    Attached Images Attached Images
    ERROR 604 - Caller's Buffer Is Too Small
    1. Ensure that your port is not configured to a mini plug
    2. If you are still having problems, contact someone

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •