I' ve got this small 23" catamaran, I need your help for the setup.
One motor or twin ?
I think that 3S is fine with 1 x 3300kV or 2 x 3300kV brushless motors, what do you think ?
I' ve got this small 23" catamaran, I need your help for the setup.
One motor or twin ?
I think that 3S is fine with 1 x 3300kV or 2 x 3300kV brushless motors, what do you think ?
I think you have the right idea. 2860 leopard or something like that and I would think a 35mm prop should be good for a single.
What hull is this and where did you get it?
Too Many Boats........So My Wife Says Anyway.
Never heard of them. Thank you!!
I'm slowly building a 24" twin hull for fun that I received free. Struts need trimming. I too am in the process of figuring out what to power it with. I have mostly 2s and 3s packs, hoping for a quick 2s setup and 3s for some zip-zip runs. Will be paying attention to this one, I enjoy the smaller stuff now a days.
60575246_10161820401640716_5652503142827294720_o.jpg60868758_10161820428620716_2463832968880193536_n.jpg
I found 2 x Hyperion (Scorpion) 2216 - 3350kV
Very soft price
I order 2 x ESCs 2-4S / 40A, do I need to put a water cooled plate ?
Those look like airplane controllers. Not so easy to get them to work with car/boat radio. Better to order esc with water cooling already and they work with surface radio.
This ESC is a Turnigy Plush 40A.
The only difference is the price, I paid 9€ for 2 pièces :
https://fr.aliexpress.com/item/33001...2dff6c37pv6BIE
It's also an airplane esc with no water cooling.
Since your going to run it in a boat why not get one with water cooling and one that will work with your surface radio.
Would like to see it run..one day.
Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellers
It has nothing to do with the ESC being “set correctly”. It is all about how you set the transmitter, and not all transmitters can be so adjusted. I have used aircraft controllers in boats by adding water cooling, or in low-amp-draw boats without water cooling. But Spektrum and Futaba transmitters can be adjusted so the air controllers will work. Good luck.
ERROR 403 - This is not the page you are looking for
Bookmarks