Results 1 to 7 of 7

Thread: swordfish pro plus 300a esc HV manual ?

  1. #1

    Default swordfish pro plus 300a esc HV manual ?

    Hi I hope this is the right place for this post ..I have a swordfish pro plus 300a esc HV I bought about 6 years ago and I never got a manual or any software with it can any one help me with this ...... Thanks Jim

  2. #2
    Join Date
    Dec 2009
    Location
    TX
    Posts
    1,887

  3. #3

    Default

    Quote Originally Posted by oscarel View Post
    Thank you oscarel I have seen that manual but my swordfish pro plus 300A esc hv 4s-15s is like 7 years old and I have 4 wires coming out for the battery 2 red 2 black i just dont know how to hook up the batterys ..do I run 1 battery to black red or do I run both red together and both black together first then

  4. #4
    Join Date
    Dec 2009
    Location
    TX
    Posts
    1,887

    Default

    Both red leads have to be tied together before going to battery, same with black. Let me see if I can find a thread that shows this.

  5. #5

    Default

    Quote Originally Posted by oscarel View Post
    Both red leads have to be tied together before going to battery, same with black. Let me see if I can find a thread that shows this.
    I found it .... its was under the fulcrum pro 300a v2 Fixed wing plane same esc just not water cooled Thanks Jim

  6. #6
    Join Date
    Dec 2009
    Location
    TX
    Posts
    1,887

    Default

    Ok cool. Here's a thread here as well just in case.

    https://forums.offshoreelectrics.com...rdfish-300-pro

  7. #7

    Default

    Quote Originally Posted by oscarel View Post
    Ok cool. Here's a thread here as well just in case.

    https://forums.offshoreelectrics.com...rdfish-300-pro
    cool Thank you very much for the help Oscarel....Jim

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •