swordfish pro plus 300a esc HV manual ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • justski
    Senior Member
    • Sep 2012
    • 230

    #1

    swordfish pro plus 300a esc HV manual ?

    Hi I hope this is the right place for this post ..I have a swordfish pro plus 300a esc HV I bought about 6 years ago and I never got a manual or any software with it can any one help me with this ...... Thanks Jim
  • oscarel
    Fast Electric Addict!
    • Dec 2009
    • 2129

    #2

    Comment

    • justski
      Senior Member
      • Sep 2012
      • 230

      #3
      Originally posted by oscarel
      Thank you oscarel I have seen that manual but my swordfish pro plus 300A esc hv 4s-15s is like 7 years old and I have 4 wires coming out for the battery 2 red 2 black i just dont know how to hook up the batterys ..do I run 1 battery to black red or do I run both red together and both black together first then

      Comment

      • oscarel
        Fast Electric Addict!
        • Dec 2009
        • 2129

        #4
        Both red leads have to be tied together before going to battery, same with black. Let me see if I can find a thread that shows this.

        Comment

        • justski
          Senior Member
          • Sep 2012
          • 230

          #5
          Originally posted by oscarel
          Both red leads have to be tied together before going to battery, same with black. Let me see if I can find a thread that shows this.
          I found it .... its was under the fulcrum pro 300a v2 Fixed wing plane same esc just not water cooled Thanks Jim

          Comment

          • oscarel
            Fast Electric Addict!
            • Dec 2009
            • 2129

            #6
            Ok cool. Here's a thread here as well just in case.

            https://forums.offshoreelectrics.com...rdfish-300-pro

            Comment

            • justski
              Senior Member
              • Sep 2012
              • 230

              #7
              Originally posted by oscarel
              Ok cool. Here's a thread here as well just in case.

              https://forums.offshoreelectrics.com...rdfish-300-pro
              cool Thank you very much for the help Oscarel....Jim

              Comment

              Working...