Page 2 of 2 FirstFirst 12
Results 31 to 34 of 34

Thread: "The Gecko" aka Miss Geico

  1. #31

    Default

    20190808_194143.jpg20190808_194248.jpg20190808_194443.jpg20190808_194600.jpg Moving right along. Servo mount, carbon posts with nylon inserts. Just finished the dress up washers.

  2. #32

    Default

    20190808_194203.jpg20190808_194143.jpg20190808_194248.jpg20190808_194443.jpg20190808_194600.jpg Just finished the servo mount , carbon posts with nylon inserts. Spun up some dress washers too. Couldn't have done it without the help of Taylor, "Big Mister".

  3. #33

    Default

    The orange epoxy is a nice touch. Did you make your own brass barbs for the water pick-ups? If so, how did you make the cone pieces? I ended up just soldering on a small section of brass tube one size larger to give the hose something to bite on.
    Vac-U-Tug Jr (13mph)

  4. #34

    Default

    No i didn't, but that's not a bad idea. Nor is the way you're doing them. That works too. I think i could cut my own tho, using the rotary table and like a 60° dremel burr, or something of that nature. I had purchased these from OSE. Quick and dirty! Thanks for the compliment. I dumped a lil createx in the g flex. Makes it a little stringy and a tad thicker too especially with micro fibers in it.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •