Just ran the first test today on my Brushless Venom Segad 55” build. Specs is: 800KV motor, 320amp esc, 12s battery (2x6s), 56mm 1,4 pitch prop.
This setup was fine but only 98 km/h. The motor and esc didnt even get warm at all.. then i tried the big 67mm 3 blade gas prop. Reached 116km/h but was not able to get full throttle because of the system stalling. Sounds like the motor makes a scream and the stalls. Maybe the prop is a bit to big. But another thing i saw was the prop depth. Looks like it could be raised a few mm up. The motor and esc still does not get warm at all.. Help
Bookmarks