looking for some suggestions guys if my esc is damaged now because of a high speed flip (landed right side up and was able to drive it back to dock) . here is what happened:
I am having overheating problems with my seaking 120a v3 esc. I am running It in a aquacraft motley crue with stock motor and 2 3s batteries. It was running perfect for several months with my octura prop, upgraded flexshaft and stock motor. Then I had a blowover when I was running the boat and since then it overheats all the time. I checked all the measurments on the strut and motor mount to make sure nothing physically moved on the crash and its all fine. Water pick up and exit is fine. I run for just a minute or 2 and it starts to cut power, then stop. Wait a few seconds, then it comes back at half power. Same thing repeats. Take it out of water and esc is so hot specifically in the black taped wire connection, so much that it melted one of the T-plugs of my batteries.