I recently done my 1982 Prather offshore deep V 40" over to electric. Motor is a TP4050 1570KV, ESC Seaking 180A V3, Battery is a 5S 6000mah 50-100c. I'm running all the stock prather running hardware kit #1020. My problem is when I give full power it raises the back of the boat out of the water. I put the cg 12 inches from transom per manual which worked great with the 7.5 nitro engine. I moved the battery all the way back to make it tail heavy, Changed angle of strut and depth of strut. Nothing seems to work. These are some of the props I've tried X442, X445, detongued CNC42x67, Prather b220, X447. I've had this boat since 82 and just getting back into RC boats after 30yrs. I would appreciate any and all advice given.
Bookmarks