Results 1 to 13 of 13

Thread: Castle xlx

  1. #1
    Join Date
    Jan 2013
    Location
    Ga
    Posts
    1,338

    Default Castle xlx

    Selling my basically new xlx that is ready for water cooling ive already changed caps and put a couple coats of conformal on the control board. Only reason for selling is to fund a heli. $165.00 shipped conus will sell with brand new tubes of Arctic silver if needed for an extra $10.
    20190205_210553.jpg
    20190205_210607.jpg
    20190205_210635.jpgsold
    Last edited by jim82; 02-06-2019 at 11:33 AM.

  2. #2

    Default

    Jim is this the castle Mamba xlx that you pulled the air cooling parts off of??? Has it been powered up at all??? Do you have the program adapter???

  3. #3
    Join Date
    Jan 2013
    Location
    Ga
    Posts
    1,338

    Default

    Yes I stripped it so I could add water cooling but I didn't finish this one been messing with other rc stuff. It has been powered on everything is good to go but the cooling needs to be fixed. I can send some clear shrink with it as well if need be. I changed all caps to zlh

  4. #4

    Default

    Quote Originally Posted by jim82 View Post
    Selling my basically new xlx that is ready for water cooling ive already changed caps and put a couple coats of conformal on the control board. Only reason for selling is to fund a heli. $165.00 shipped conus will sell with brand new tubes of Arctic silver if needed for an extra $10.
    20190205_210553.jpg
    20190205_210607.jpg
    20190205_210635.jpg
    I will take it for $160.00 shipped, I will PAY Pal as soon as you say it mine…..

  5. #5
    Join Date
    Jan 2013
    Location
    Ga
    Posts
    1,338

    Default

    sold

  6. #6

    Default

    Quote Originally Posted by jim82 View Post
    Selling my basically new xlx that is ready for water cooling ive already changed caps and put a couple coats of conformal on the control board. Only reason for selling is to fund a heli. $165.00 shipped conus will sell with brand new tubes of Arctic silver if needed for an extra $10.
    20190205_210553.jpg
    20190205_210607.jpg
    20190205_210635.jpgsold
    Jim what size caps do u put in there ? Plz !!!

  7. #7

    Default

    It looks like he put on Rubycon 35V ZLH caps instead of the Panasonic caps that normally come on the Castles.
    Tyler Garrard
    NAMBA 639/IMPBA 20525
    T-Hydro @ 142.94mph former WR

  8. #8
    Join Date
    Jan 2013
    Location
    Ga
    Posts
    1,338

    Default

    Correct. I changed them all out

  9. #9

    Default

    Do you know the reference of the mosfet used in the castle XLX (we can't see it on the photos) ? Thx !
    Last edited by maxxximatoze; 02-25-2019 at 05:23 AM.

  10. #10

    Default

    This esc is the Castle Mamba XLX

  11. #11

    Default

    Quote Originally Posted by Alanterry View Post
    This esc is the Castle Mamba XLX
    OK, but do you know the mostfet reference used on the pcb of the XLX (the 48 little black plastic squares) ?

  12. #12

    Default

    Here is what they say on them

    Quote Originally Posted by maxxximatoze View Post
    OK, but do you know the mostfet reference used on the pcb of the XLX (the 48 little black plastic squares) ?
    Attached Images Attached Images

  13. #13

    Default

    Thx a lot !!!

    If it's a photo taken from the Castle XLX, then it seems that the mosfet used are still the same ref than in the XL2 and XL so it's been almost ten years with the same BSC019N04 mosfet (BSC019N04NS in XLX case)... see this https://www.rc-monster.com/forum/sho...&postcount=119 and this is the datasheet >> https://www.infineon.com/dgdl/Infine...16c45be78a0832
    Last edited by maxxximatoze; 02-26-2019 at 10:19 AM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •