Results 1 to 4 of 4

Thread: Proboat Motor and Esc Combo

  1. #1
    Join Date
    Jan 2017
    Location
    OH
    Posts
    77

    Default Proboat Motor and Esc Combo

    *_*_*_*SOLD*_*_*_*


    Pulled out of a Proboat Miss Elam 1/12 hydro that I'm building up.
    Esc battery end has no terminals, can put 5.5mm bullets on for free if buyer wants.

    ---Specs on motor---

    Type:Brushless 6 Pole Inrunner Motor
    Bearings or Bushings:Two 5 x 11 x 5mm Bearings
    Voltage:10-21
    RPM/Volt (Kv):1500
    Continuous Current:45
    Speed Control:PRB3309
    Overall Diameter:36mm
    Shaft Diameter:5mm
    Shaft Length:18mm
    Overall Length:74mm

    ---Specs on esc---

    Forward:Yes
    Reverse:No
    Brake:Yes
    Continuous Maximum Current:45A
    Input Voltage:Minimum 10V, Maximum 21V
    Momentary Peak Current:55A
    BEC Voltage:5.8V

    50$ shipped for both

    20190111_084145.jpg
    Last edited by Mbires12; 01-12-2019 at 07:19 PM.

  2. #2
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    I’ll take it. No need for bullets
    "Look good doin' it"
    See the fleet

  3. #3
    Join Date
    Jan 2017
    Location
    OH
    Posts
    77

    Default

    Sounds good Jesse, Paypal is Mbires12@gmail.com

  4. #4
    Join Date
    Aug 2008
    Location
    CO
    Posts
    7,080

    Default

    Thanks Michael, $$ sent
    "Look good doin' it"
    See the fleet

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •