I'm building a 1/10 scale FE and want to be NAMBA compliant if I decide to race. My question pertains to this battery limit description

E. POWER AND DRIVE TRAIN
E.1 Power and Drive Train rules for the vintage class are:
E.1.1 The only power source shall be up to 12 sub‐c battery cells of NiCd or NiMH chemistry, or up to 4S configured Lithium Polymer (LiPo) battery(s). The total capacity of batteries in the allowed chemistries and configurations shall not exceed a total capacity rating of 6,000 mAH and a total fully charged voltage of 16.8 volts DC.
E.1.1.a Only LiPo batteries with a manufacturer’s maximum discharge rate of 20C or greater shall be allowed for manufacturer’s rated capacities less than 4,000 mAH and a manufacturer’s maximum discharge rate of 15C or greater shall be allowed for manufacturer’s rated capacities of 4,000 mAH and up.

Does this mean I could run 2ea 2S 3000mah batteries?

Thanks, Kevin