MMP Watersnake Twin

[Roy Van De Sande]

Hello everyone,

I am selling my MMP watersnake. I build her up as a twin. The hull and deck are strengthened with multiple layers of glass and carbon fibre and epoxy.

Size:
Length: 1400mm
Width: 325mm

Setup:
Motors: 2x TP5850 820kv
ESC's: 2x Flier 400A 16s esc with extra caps
Servo: Hitec 9380TB (retail price around 180$)

hardware:
2x MTC struts
2x MBP coupler 8mm to 1/4' flex
Rudder from modellbaupirat with double cooling intake
Turnfins + Trimtabs
Hatchbolts build in.

I ran this setup on 10s (5000mAh 10s per motor) with octura x457 props. Speeds around 60-65mph with runtimes of around 8-9 minutes. The size of the boat makes here suited for the more open/rougher water. Stable boat at speed. Motor and esc's were always below 95 Fahrenheit even when pushed in mid summer so if you like more speed, it is just a matter of putting in more cells or other props. I always had enough enjoyment with the 10 cell setup and the long runtime.

Price = 1700 $ shipped in a wooden box so nothing gets damaged during transport.
If you would have any questions, please feel free to contact me at any time :)
Happy holidays!


48414882_2052320701474075_246809793153466368_n.jpg48423221_706770583035993_7737620790492790784_n.jpg48418706_2226725064212593_5594863479124131840_n.jpg48428216_282797552379313_4438120896732856320_n.jpg48901006_2099464346740859_7679625035346083840_n.jpg