I made a mistake in my reply I did not start this post I should have looked before posting. I thought it was the one I started. Oops I have been wrong before.
I just want to say I think the cap bank and the 8 mm connections are my next improvement as I have melted different ones of my 6 mm connections at different times yet my temps on the esc and motor are fine the yowoo lipo is on the edge at 3.2 volt after the runs it hits 60 Celsius
What GPS did you use to check your 90 mph plus speed?
I have seen on Sam Hallstrom?s posts on YouTube where his 33 fe using the H7 on a Steve Nue 1515 2070 KV by memory hit only 68 mph but the 1817 45 CL hits 88 mph.
The 1515 in a Nue is about a 4040 in a TP
The H7 made it corner and handle incredible but it was slow so having said that if this translates the same in your 33 fe 100 mph is highly likely with the cleaver style 1817 45 CL