Oxidean Marine Dominator 6S run

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Icarusdanoob
    Junior Member
    • May 2018
    • 7

    #1

    Oxidean Marine Dominator 6S run

  • NativePaul
    Greased Weasel
    • Feb 2008
    • 2760

    #2
    Was it hooking at the start or wer you trying to turn that sharply?
    Was that full throttle?
    Did it get too hot and shut down?
    What size battery did you use and how much was left in it at the end?
    Paul Upton-Taylor, Greased Weasel Racing.

    Comment

    • Icarusdanoob
      Junior Member
      • May 2018
      • 7

      #3
      It was my first run with the boat. I had not yet dialed in rates so steering was super touchy. As for cutoff, it was due to radio range. It is a carbon/Aramid hull and I had yet to tidy up the antenna mast. The run was 6S Turnigy
      Graphene 4000 65C. Right about 3 minutes continuous WOT and I hit LVC @3.7V. The boat would be better served with more battery capacity but that was the biggest Graphene HK had in stock when I made the purchase.
      I made a dozen runs back to back through 4 batteries that day once I got everything sorted out and temps on motor and ESC never got above 98F. Batteries came in at ~115 but those temps dropped too once I got a couple cycles on them.
      The boat is currently spinning a 44mm prop. I plan to prop up.

      Comment

      • Crash
        Senior Member
        • Oct 2015
        • 313

        #4
        Have you got much more time in on this boat?

        hows it performing for you after dial in?

        Comment

        • Crash
          Senior Member
          • Oct 2015
          • 313

          #5
          can you fit 2 lipos in the battery tray?

          Comment

          • Icarusdanoob
            Junior Member
            • May 2018
            • 7

            #6
            Originally posted by Crash
            can you fit 2 lipos in the battery tray?
            I managed about a dozen more runs after that video. The sharp turns were solely attributed to not having dialed down the rates on the TX.
            That said, the boat NAILED them at WOT without a hiccup. As for battery capacity... you could absolutely stuff 2 6S batteries in it BUT, you would lose the space to flotation at the expense of added weight.
            Your call...
            The boat can handle a MUCH bigger prop than that in the vid. It comes with a 42mm CNC and the builder stands behind use with a 48mm, 2 blade. Fact is, he backs a 50 provided you scale up, monitor temps and proceed within reason.
            The boat is a SOLID RTR package.

            Comment

            • Crash
              Senior Member
              • Oct 2015
              • 313

              #7
              Cool.
              I ordered the artr version..

              Comment

              • T.S.Davis
                Fast Electric Addict!
                • Oct 2009
                • 6221

                #8
                If you don't want the baggage that comes with owning an OM.

                DY Motor Shop : - Handy Tools RC Boats RC Cars and Trucks Connector Sticker ecommerce, open source, shop, online shopping, store


                We have a couple DY and an OM in our club. It's a solid design. The DY won our clubs spec mono class by a ton of points this season.
                Noisy person

                Comment

                • Crash
                  Senior Member
                  • Oct 2015
                  • 313

                  #9
                  Originally posted by T.S.Davis
                  If you don't want the baggage that comes with owning an OM.

                  DY Motor Shop : - Handy Tools RC Boats RC Cars and Trucks Connector Sticker ecommerce, open source, shop, online shopping, store


                  We have a couple DY and an OM in our club. It's a solid design. The DY won our clubs spec mono class by a ton of points this season.
                  Baggage...
                  What are you referring to?

                  Comment

                  • Crash
                    Senior Member
                    • Oct 2015
                    • 313

                    #10
                    this is a fun boat

                    Comment

                    Working...