Results 1 to 6 of 6

Thread: Neu 1515 2y/f/h

  1. #1

    Default Neu 1515 2y/f/h

    I bought this motor thinking it was a d wind but it is a y. Is there a hull it would push with 8s. I was going to run it on 4s2p thinking it was 2200 kv but it is 1100kv. Any thoughts would be greatly appreciated thanks greenblast

  2. #2

    Default

    Run it in a normal 4 cell boat but instead of 4s2p run it connected as 8s1p with an appropriate controller.
    Tyler Garrard
    NAMBA 639/IMPBA 20525
    T-Hydro @ 142.94mph former WR

  3. #3

    Default

    Quote Originally Posted by RaceMechaniX View Post
    Run it in a normal 4 cell boat but instead of 4s2p run it connected as 8s1p with an appropriate controller.
    Cool. Thanks for the info. Would it swing the same size prop as a 4s neu?

  4. #4

    Default

    Its not completly true. But a "Honda" 600 cc /50 kw motor would be the 4s2p. The "Harley" with the 1200 cc/ 50 kw would be the 8s1p. So yes it would swing the same prop.

  5. #5

    Default

    Prop it the same. Something in the 40-44mm range is a good starting spot.
    Tyler Garrard
    NAMBA 639/IMPBA 20525
    T-Hydro @ 142.94mph former WR

  6. #6

    Default

    Quote Originally Posted by RaceMechaniX View Post
    Prop it the same. Something in the 40-44mm range is a good starting spot.
    Thanks for the info! So i think i get now high kv =1/2 volage double the amps double the volts=1/2the amps both give the same watts. Now i need to figure what hull. i was going to resurect a old meanmachine with the 4s set up.I also have a miss vegas it would bolt in.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •