Results 1 to 13 of 13

Thread: 32" Carbon fiber fightercat rivercat

  1. #1
    Join Date
    May 2014
    Location
    FL
    Posts
    308

    Default 32" Carbon fiber fightercat rivercat

    Here is a 32" cf fighter cat rivercat. It has been enlayed w/ cf and has cf plate reinforcing in the transom and rudder area. It also comes w/ cf motor mounts that are drilled for 36sized and 28sized motors. The hull is not drilled and is like new.
    $260 shipped in the lower 48
    20181030_154838.jpg20181030_154808.jpg20181030_154946.jpg20181030_155155.jpg20181030_154959.jpg

  2. #2
    Join Date
    May 2014
    Location
    FL
    Posts
    308

    Default

    Bump

  3. #3
    Join Date
    Apr 2014
    Location
    TX
    Posts
    858

    Default

    What drives are typically used for these hulls?

    ose-80105.jpg 110mm versions for 3/16" prop shaft, or something shorter?

  4. #4
    Join Date
    May 2014
    Location
    FL
    Posts
    308

    Default

    I would use the 80mm version of those.

  5. #5
    Join Date
    Apr 2014
    Location
    TX
    Posts
    858

    Default

    Quote Originally Posted by Vin-m View Post
    I would use the 80mm version of those.
    The 80mm ones for 4mm prop shafts? Can you post a sketch of one of the transom footprints, with dimensions, or some pic's with a ruler? I already have a pair of stingers and I'm wondering if there's enough room for them to bolt on and still be adjustable. It might be useful info to any potential buyers besides myself.

    Thanks,
    Michael P.

  6. #6
    Join Date
    May 2014
    Location
    FL
    Posts
    308

    Default

    Yes the 80mm w 4mm shafts. If you look 2 post below this one on the forsale page I sold a built boat with the stingers were talking about and there is some pictures to give you an idea. I'll be home Saturday and I can get you some measurements then if you want?

  7. #7
    Join Date
    Apr 2014
    Location
    TX
    Posts
    858

    Default

    Quote Originally Posted by Vin-m View Post
    I'll be home Saturday and I can get you some measurements then if you want?
    No rush. If you remember Saturday, that'd be cool.

  8. #8
    Join Date
    May 2014
    Location
    FL
    Posts
    308

    Default

    Yup np. I'll post em in the morning on sat

  9. #9
    Join Date
    May 2014
    Location
    FL
    Posts
    308

  10. #10
    Join Date
    Apr 2014
    Location
    TX
    Posts
    858

    Default

    Hey, thanks! Looks like my stingers will fit that. I'm trying to finish up some other builds and thin the fleet, actually, so I'll focus on that for now. I'll keep my eye on this one, though.

  11. #11
    Join Date
    Nov 2008
    Location
    BC
    Posts
    687

    Default

    you have been paid thanks

  12. #12
    Join Date
    May 2014
    Location
    FL
    Posts
    308

    Default

    Sold pending payment

  13. #13
    Join Date
    May 2014
    Location
    FL
    Posts
    308

    Default

    Sold

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •