Results 1 to 4 of 4

Thread: drive line stuffing

  1. #1
    Join Date
    Oct 2018
    Location
    mi
    Posts
    45

    Default drive line stuffing

    found this little plastic piece hiding in my miscellaneous drawer ...put it on the mono stuffing tube on the inside after a run nothing bone dry like a desert....poked a small hole through to accept the wire and packed it with grease as well...IMG_1523[1].jpg

  2. #2
    Join Date
    Aug 2010
    Location
    uk
    Posts
    2,887

    Default

    Yes that is a pretty common mod to stop water entering the hull, some use the method you have used. You can also use heat shrink tube or most use a piece of silicon water tube esp if its on a flex cable.

  3. #3
    Join Date
    Oct 2018
    Location
    mi
    Posts
    45

    Default

    yes I agree I just didn't have the right size in my inventory of heat shrink...

  4. #4
    Join Date
    Jul 2016
    Location
    IL
    Posts
    4,100

    Default

    I use automotive vacuum caps like that on stuffing tubes with wire drives.
    Vac-U-Tug Jr (13mph)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •