Results 1 to 30 of 429

Thread: ML Boatworks RSX380 Outrigger! My first FE wood kit build...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 11-05-2018, 11:49 PM #11
    sammyha's Avatar
    sammyha
    sammyha is offline Fast Electric Addict!
    Join Date
    Jul 2018
    Location
    WI
    Posts
    1,013

    Default

    [EDITED] As per Raydee's tip in post #71, this short piece of 1/4" tubing stays in the boat.

    I'll pre-bend 7/32" tubing to 12 degrees. It will slide into the 1/4" tubing. I will be running a 3/16" flex cable without a teflon liner. This tip was from Greg Schweers(7/32"tubing, NOT 1/4"!).

    Greg also sent me pictures of the 1/4" tubing loctited in the strut shown in the sketch below in post #154.

    So, I can change out a damaged stuffing tube without cutting everything out of the boat.

    Great stuff guys!


    Sent from my SM-G950U1 using Tapatalk
    Last edited by sammyha; 11-08-2018 at 10:52 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules