Results 1 to 22 of 22

Thread: Modified ATOMIK ARC 58" RTR

  1. #1
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default Modified ATOMIK ARC 58" RTR

    I am selling a modified ATOMIK ARC.
    It is ready to run.
    In the pictures you will see that the paint has spider cracks on the hatch and at the rear of the boat - on the top. The boat was re-enforced in the rear. When I first bought the boat, I noticed that the rear of the boat could use more strength. The boat has been run about 10 times. It has not been abused. There is one or two small scuffs. We ran the boat with four 3s batteries = 6s output. We have gone 62mph using a Garmin GPS.

    The picture of the hatch will show the spider cracks. A picture of the underside of the hatch will show that it is not cracked.
    Leopard 960kv motor
    Seaking 130A - HV ESC
    3,000mah receiver battery
    3 blade prop


    My son and I are selling our boats and parts inventory. We have started flying.
    PLEASE: NO TRADES. We are not parting it out.
    SOLD
    SOLD

    Atomik 01.jpgAtomik 02.jpgAtomik 03.jpgAtomik 04.jpgAtomik 05.jpg
    Last edited by Finest Racing; 10-05-2018 at 08:37 AM.

  2. #2
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

  3. #3
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    Hey, Finest... I'm interested in your ARC 58. I'm trying figure out my financing, not sure how to swing it yet. Are you selling a transmitter with the boat?

  4. #4
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    Transmitter included. You will only need batteries.

  5. #5
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    Finest is the boat still available?

  6. #6
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    Yes, it still available. Thanks, Rob

  7. #7
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    Rob, I would like to buy it. its my first time, so what is the procedure?

  8. #8
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    You can send me the payment to my Pay Pal account. Once I receive the payment, I will pack it up and ship the boat. I will send you the tracking number. My Pay Pal user ID is paypal.me/FinestRacing
    Thanks, Rob

  9. #9
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    My area code is 63301.

  10. #10
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    1,250.00 correct?

  11. #11
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    Shipping is included with the price. Thanks

  12. #12
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    Payment sent... Please ship to... 3400 Civic Green Drive, St Charles, MO 63301
    You can instructed them to leave it in the entry way. Thanks Rob

    Karl

  13. #13
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    If you have any pictures of the interior setup, battery place for example, please post.

    Thanks again...

    Karl

  14. #14
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    Thank you, I received the money. I will pack it up and ship it tomorrow. As soon as I ship it, I will send you the tracking number. Thanks again, Rob

  15. #15
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    Great can't wait...

    Thanks Rob

  16. #16
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    I will post pictures of the inside and where the batteries are placed.

  17. #17
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    A32EFDC7-D2C6-45EF-B886-09172352C809.jpg4A2980DC-6891-4C55-8C6B-C32E3B6672BB.jpg20911D84-E96C-4CDC-AFE6-F176811F6AA6.jpg616C6798-99D5-47FB-B6B8-F4136138FC1D.jpg
    The four bolts that secure the rudder to boat are taped to a envelope with the steering rod. Use blue loc rite on the four bolts. The rudder assembly, bolts and instructions manual are inside the hull. Appears that it should arrive Monday.

  18. #18
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    thanks Rob

  19. #19
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    received the boat, thanx. waited all afternoon, must of fallen sleep, did not hear the doorbell and missed the delivery. had to wait until 730pm to drive to ups depot [not too far]. everything seems ok. haven't open the transmitter package yet. spent a good amount of time picking up packing peanuts. now I just need to workout the battery/wiring. I have a traxxas charger and connectors for my M41. want to use the same on this boat. its my new winter build... thanx again. will keep you up to date if you like.

  20. #20
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    Glad you received it. The UPS store said they were going to use minimal amount of peanuts. I stressed that bubble wrap and thick styrofoam would be best around the boat.

  21. #21
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    the boat was bubble wrap, but there were a lot of peanuts surrounding it. it was packaged very well.

  22. #22
    Join Date
    Aug 2018
    Location
    MO
    Posts
    21

    Default

    unwrapped the transmitter last night. I was checking out the controls on it when I notice the trigger was moving slightly. I touched it with my finger and it fell on the floor. the connecting portion of it is broken. don't know how it happened. I need to see if I can find a replacement trigger from Atomik.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •