Results 1 to 5 of 5

Thread: ARTR Lizard Xtreme C-AFK Everything Accept Transmitter - Ran One Time

  1. #1
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default ARTR Lizard Xtreme C-AFK Everything Accept Transmitter - Ran One Time

    ARTR Lizard Xtreme C-AFK
    The decals are water base. They can be removed very easily.
    I built this boat for my son and I to race in NAMBA. After completing the boat my son lost interest and we started flying planes.
    My son and I took the boat to the lake to check our build. It worked great. It was in the water for about 2 to 3 minutes. We ran the boat on 4s in parallel.

    All you will need is a transmitter to have fun.

    PLEASE: NO TRADES OR PARTING OUT. I am selling the boat complete.
    Asking $1,000.
    Shipping will be calculated for the destination.
    I am located in Central New Jersey (USA).

    The Official Seal is located inside the boat. Picture below with seal.
    Material: C-AFK
    Color: Red
    Length: 830mm (32,66")
    Width: 240mm (9,44")

    Assembled:
    Lizard C-AFK - 1717/N-C-AFK
    Fit out set carbon Lizard Xtreme -
    ESC Mount
    NEU 1527 5Y 2500KV 5mm shaft
    Flex shaft -
    Silicon hose
    Water outlet
    Battery Trays - Both sides
    Traxxas 2075 Steering Servo
    Spektrum MR200 Receiver
    Hobbywing 180a ESC
    MBP Collet 5mm
    Water sealed rubber cuff
    MTC Rudder - Strut combination with integrated water inlet

    Lizard 01.jpgLizard 02.jpgLizard 03.jpgLizard 05.jpgLizard 06.jpg
    Last edited by Finest Racing; 05-08-2019 at 09:52 AM.

  2. #2
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

  3. #3
    Join Date
    Apr 2007
    Location
    ON
    Posts
    2,908

    Default

    What ESC is in it?
    Why a 8mm collet with a 5mm motor shaft?

    2500 Kv motor - how many cell did you run and what size prop?

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  4. #4
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    My mistake for the collet. I have a 5mm collet on the boat. I ran two 4s packs - parallel. The ESC is a Hobbywing 180a. The prop I used was a 442.

  5. #5
    Join Date
    May 2013
    Location
    NJ
    Posts
    294

    Default

    Bump

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •