Results 1 to 8 of 8

Thread: Prop suggestion Cheetah 4S ovals

  1. #1

    Default Prop suggestion Cheetah 4S ovals

    I would like advice on ABC props for a said Cheetah.

    3 blades?? I've seen Ray Presnell run a ABC 3 blade on a boat but, few people talk about them, just 2 blade props.

    1521 1.5D and REvo packs.

    Thank you.
    Last edited by ray schrauwen; 09-03-2018 at 08:36 PM.
    Club GalvaPhong

  2. #2

    Default

    Ray, I wonder if one of the 15* rake 3’s would cut it. The 10* old standard ABC props have a lot of lift would likely put the nose into the water. The 17* have the opposite effect but the 15* are not as bad in my experience so far.
    Seems to me Tony liked a 50mm prop for a single Cheetah.

  3. #3

    Default

    Ray

    1521 1.5Y is only 1050 KV, a little low for 4S on a CAT????


    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  4. #4

    Default

    Quote Originally Posted by TRUCKPULL View Post
    Ray

    1521 1.5Y is only 1050 KV, a little low for 4S on a CAT????


    Larry
    Sorry Larry it’s a D wind. Lol...
    Club GalvaPhong

  5. #5

    Default

    Quote Originally Posted by ray schrauwen View Post
    Sorry Larry it’s a D wind. Lol...
    That's better - 1860Kv on 4S

    I have a few 450/3 cut down to 48mm, detounged, backcut, and a bit of tip cup. you can try.
    or a ABC 1915 -17 degree rack 2 blade prop.

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  6. #6

    Default

    Thanks Larry. Going back to my cave tomorrow or Wed. Selling my P-Shooter, lots to do... car repairs again, yada yada...
    Club GalvaPhong

  7. #7

    Default

    Ray, a little late (just bumped into this thread) - If you keep the hull loose/nicely aired out you can run just about any prop - the 1521 1.5D is like a diesel bulldozer motor - mucho grunt. I replaced mine with a somewhat comparable TP Power 4060 (2040KV - sorta close) and have run 450/3 Oct's and for 2-Lap record runs or just for going to "11" the 452/2 without breaking a sweat. I'd give Larry's cut down 450/3's a shot - sounds like a great choice.Keep it loose (no plowing)

    Here's the 2040KV TP Power with a fairly stock 447/3:

    https://www.youtube.com/watch?v=Cl5ebHR6wR4&t=10s
    2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
    2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
    '11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono

  8. #8

    Default

    I am fairly used to those props but thank you for chiming in. I was curious about ABC props specifically.


    Just trying to see what I can play with in ABC.


    Major brain fart. Big edit, lol...
    Club GalvaPhong

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •