TenShock Brushless / Pro Marine
NEU Motors / Rico Racing/ Castle Creations
2023 NAMBA & 2018 IMPBA FE High Points "National Champion"
All good, ideas from people in this forum is what this is all about, shearing ideas for our love of the hobby
On My TP 5850 it has corkscrew fins by design, so the water coils so to speak from the inlet to the outlet.
So with the bigger nipples in it now you would think it would help with more volume and flow .
The smaller nipple bore at least on the outlet side will slow the flow a little and possibly increase thermal transfer of heat so I've been told. The key is the volume of water inside the jacket and as I posted earlier the stock TP jackets don't cut it in that regard.
Futaba Team Driver
- IMPBA Hydro Technical Director -
The jackets you have say they are for the 56 series also so you might be able to get another brand 56mm one on. Its 58 because of the fins.
Specification:
Model: LB56WCJ-50MM
Applicable Motor Model: 56 Size Brushed/Brushless Motor
Inner Diameter: 56mm
Outer Diameter: 63mm
Silica Ring Size: φ60X2mm
Size of the Coppery Connector:φ5.0X9.5mm
Weight: 45 gram
Package Content:
1X Brand New Leopard Water Cooling Jacket 56mm(DIA)-50mm(Length)
Do you think this will work with a TP 5850 ?
https://youtu.be/_Y6mW7Klh_0
This is an example of a leopard motor on 5s, 1800kv. An example of great result.
Back in 2014 I think?, I won 3rd in Q mono, Michigan cup with a 40" mono, SSS 5684-1200kv and SF240. ran cool as a cucumber on 4s2p. These are still available from you know where for about $115 all in.
Nortavlag Bulc
Bookmarks