New Zonda full CF 980mm

[Prodrvr]

Paint is coming along. Zach (Zach's Customs) sent me a little teaser pic of under the tunnel.

[Steven Vaccaro]

Nice

[Prodrvr]

Thx Steve! Aside from a different hull design, it will resemble the boat in my avatar. I'm going to be meeting the owner/driver of that race boat Sept.28. Him and his throttleman will be autographing the canopy, then the final clear coat will go on. I won't have the boat back in my hands until the second weekend in October. I can start rigging it then and see what this thing will do.

[srislash]

That’s nice for sure

[Prodrvr]

That’s nice for sure

Thanks! I'm just hoping the Poseidon motors get me to the promised land lol.

[Budman23]

Yup, 12s and 1020kv’s on mine:

I just bought a zonda recently and I’m hoping to be able to get it to do at least 100 mph... it came with two castle 1515 motors with 2200 kv.. I’ve got a few nice props but don’t know anything about them because they were just loosely thrown into a parts bag.. Do you have any advice on how big of esc s I should get ? I’m on a budget and can’t afford the real good top dollar stuff , but any sujestions would be appreciated..
looking forward to watching more videos of your bitcoin boat...
Budman23

[Prodrvr]

100 mph and budget is tough, if not impossible.

[srislash]

100 mph and budget is tough, if not impossible.

Well in all honesty someone told me it couldn’t be done with cheap Chinese gear! Guess what!! It’s been in the water for years.
One just has to be smart and patient. And maybe listen to the fella with $3k worth of props, LOL

[Prodrvr]

Well in all honesty someone told me it couldn’t be done with cheap Chinese gear! Guess what!! It’s been in the water for years.
One just has to be smart and patient. And maybe listen to the fella with $3k worth of props, LOL

$3K in props? Yikes lol Now I've seen cheap Chinese gear make MHZ Mystics fly, but that's a super efficient hull.

[srislash]

$3K in props? Yikes lol Now I've seen cheap Chinese gear make MHZ Mystics fly, but that's a super efficient hull.

Haha, yup I just was kinda moving up in MPH there set by set. I really only aimed for 100 on that boat. But then 105, then 110 and then, and still aiming at 120. Not quite there! Dang it!

Might just make it on HPR tho.

[srislash]

I just bought a zonda recently and I’m hoping to be able to get it to do at least 100 mph... it came with two castle 1515 motors with 2200 kv.. I’ve got a few nice props but don’t know anything about them because they were just loosely thrown into a parts bag.. Do you have any advice on how big of esc s I should get ? I’m on a budget and can’t afford the real good top dollar stuff , but any sujestions would be appreciated..
looking forward to watching more videos of your bitcoin boat...
Budman23

I guess we should get back to Budman here. What kind of budget are you thinking or what we’re you planning to replace? 100 is steep proposition but close to it is not impossible. And it also takes the right running conditions and space.

[Prodrvr]

Haha, yup I just was kinda moving up in MPH there set by set. I really only aimed for 100 on that boat. But then 105, then 110 and then, and still aiming at 120. Not quite there! Dang it!

Might just make it on HPR tho.

You'll make it!

[Prodrvr]

Been a while, but got an update from the painter...https://www.facebook.com/zachary.mil...469844090/?t=2

[royalcasa]

Paint is coming along. Zach (Zach's Customs) sent me a little teaser pic of under the tunnel.

I googled him can’t seem to find him.

[Prodrvr]

I googled him can’t seem to find him.

Did you click on the link in post 43? If you're interested in paint work, I can get you in touch with him. He's in Port Richey.

[royalcasa]

I did, but my Safari will not down load the video. Yes I am interested so I can have in idea of what it would cost. Thanks

[Prodrvr]

Sorry you can't open the video. Here are some still pics. This cost me $600.

[Prodrvr]

It's difficult to see all the detail work in those pics.

[royalcasa]

WOW, That is just beautiful man.

[Crash]

Sorry you can't open the video. Here are some still pics. This cost me $600.

Wow. that's nice

[srislash]

Very nice!!! Love it. Almost the Stihl Racing design but not quite.

[Prodrvr]

Thanks guys!! Shawn, that is the Stihl boat. Aaron bought it from them last year, then got a repaint, new engines and drives. The real one is my avatar.

[emspjay]

That guy does amazing paint work!! I can see the detail in the pics! This is going to be the best Zonda for sure!!

[Prodrvr]

That guy does amazing paint work!! I can see the detail in the pics! This is going to be the best Zonda for sure!!

Thanks man!! I hope I can make it as fast as it deserves to be!

[hispeed10k]

Sorry you can't open the video. Here are some still pics. This cost me $600.

WOW!!!!!!!!! This is beautiful!!!!!! I've always liked the Zondas...this has just cemented my decision!!!!! Awesome!!!

[Prodrvr]

WOW!!!!!!!!! This is beautiful!!!!!! I've always liked the Zondas...this has just cemented my decision!!!!! Awesome!!!

Thank you!!

[Alfa Spirit]

The design of the winshield is very strange.

[Prodrvr]

Nice lineup. I didn't even ask him about the windshield. They're always black.

[akula]

The design of the winshield is very strange.

[/IMG]

This is your own collection Alain ?
Have you ever painted a boat/windshield ? I don't think so...

@Prodrvr, nice hull and paint scheme !

[Prodrvr]

This is your own collection Alain ?
Have you ever painted a boat/windshield ? I don't think so...

@Prodrvr, nice hull and paint scheme !

Thank you sir!!