Jae 33 fe rtr

[sweed_61]

I am selling my RTR/race ready JAE 33 FE rigger this boat was built and set up by Mike Walker builder for Zipkits all the parts are top quality including the upgrade of a seedmaster hydro mount and rudder the inside seems have been reinforced with a bead of epoxy for durability and strengh....

All of the items that are installed & listed below are less then a year old and will be included in this sale.

1 Esc Swordfish X 220/300 amp with data loging
1 TP 2600KV brushless motor
1 Futaba receiver
1 High tech (high torque) sterring servo
1 ABC prop 1717-17-45 prepped by Brian Buaas
1 ML boat works rigger stand
1 set of solid carbon fiber boom tubes
4 Dionogy 4s 5000mah 70c lipos
1 Box with everything you need to support the runnning & maintenance extra turn fin, flex cable, bullet connectors etc

This JAE has been clocked with a onboard GPS at 65mph there is no damage or has it ever been hit / wrecked. It's dialed in using the esc data logging and working with some of the best in the rc boat racing scene to run a hard 5 laps approx 1 minute 50 seconds a normal race all you will need is your radio the performance is unbelievable it's a good boat in mint condition there is not one scratch on the paint I never raced this boat and there is no damage....

$950.00 plus shipping selling to the lower 48 only

I have more picture for the serious buyers.

First one to say I take it wins Pay via PayPal to emilskog@gmail.com

20180812_125920.jpg
20171209_072838.jpg
20171125_125402.jpg
20171125_125116.jpg
20180812_130908.jpg

[sweed_61]

Everything included in this sale is of quality appreciate your feed back....

[jeffdascanio]

What size are the battery connectors and esc connector?

[jeffdascanio]

ESC connector.

[sweed_61]

Battery & esc bullet connectors are Castles Creations 6.5mm

[TRUCKPULL]

What size is the TP 2600KV motor.

Larry

[sweed_61]

GLWS

Appreciate the compliment if you are serious to sweetened the deal I will include my my brand new never used backup Swordfish X 220 / 300 amp esc and 2 extra ABC props balance and prepped by Mark Sholund & Brian Buass for the same price $950.00 plus shipping

I would be willing to take a down payement and hold the boat and extras for you pending payement in full of the balance let me know ?

[sweed_61]

Larry

Here is the specs from the TP website

TP Power motors are made of the best materials that are available, and have high efficiencies (>90%) required for the most demanding applications. The TP 3640 Series can be applied in Fun jets, F5B, Mono, Hydro, CAT, etc.

Parameters:

Can: Smooth

Wind: 3Y

KV: 2600

Max Amps (A): 127

Max Volt (V): 23.6

Continuous Power (W): 1350

Max Power (W): 2800

Max RPM: 60 K

Internal Resistance (Ohm): 0.0066

No-load Current (A): 3.2

Shaft Diameter (mm): 5

Diameter X Length (mm): 36 X 74

Weight: 308 g

Pole: 4-pole

[tsksmith]

Please disregard this post, I found pictures in another post.

Can you post pictures of the back and battery compartment?

Thanks.

[sweed_61]

Here are a few picture of the rear & the batterie box hope it helps you

20171124_185113.jpg
20170826_191318.jpg
20171124_185113.jpg
20170826_191249.jpg

[jeffdascanio]

Am interested in deal you offered larry.please pm me. If he doesn't take it I'll buy it now.

[jeffdascanio]

I'll take it.

[sweed_61]

Sold to Jeff pending payment

[sweed_61]

Payment received SOLD to Jeff

[sweed_61]

Boat has been shipped tracking # forwarded to buyer....