Originally Posted by
Crash
I got data recorder to work.
You have to run the program as Administrator and then it works .
I found a post here at OSE about it.
the data record says I am pulling 255 amps at 100% throttle
lipos are dropping down to 19.6 during 100% throttle
temps are 150f max
rpm is 30k+ at 100% throttle
it seems the amp draw is too high...what do you guys think
A little smaller dia. prop, or less pitch. will lower your AMP draw.
It will also allow your voltage under load to be a bit higher.
a higher Voltage under load = higher RPM = Higher top speed.
Larry
Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet
Bookmarks