I really don’t want to, but I need to (boat for sale)

[kfxguy]

Let me be honest. I really really don’t want to sell this boat. But I really need to do I can complete my gto project. I’m beating myself up about this. This boat is a masterpiece to put it lightly. It’s the last boat I’ve built for myself so I’ve taken everything I’ve learned over the years and applied it to this boat. I won’t lie, every time I pull this boat off the shelf and check it out, I amazed and it literally takes my breath away. Sounds silly I know and it’s not just because I built it. Pictures do this gem no justice whatsoever. I only ran it one weekend, I ran it on 2s and 3s. It does about 38-40mph on 2s and 56-60mph on 3s and depending on prop 78-90+ on 4s. Yea, this little boat will cruise at 90+ with ease. It’s 27” long and it’s called a mini zonda although my name for it is mini Rivercat. It does turn pretty well if your playing around. If your looking for a oval boat, this ain’t it. However, like I said it does turn pretty good under 50-60mph. It will handle some chop on lower voltages but don’t think your gonna hit 90 in chop. It’ll do it on smooth water with ripples.

I put lots of effort into this boat. I was extremely picky with hardware. I bought stuff for it that didn’t quite fit right. I machined hardware for it a couple times before being satisfied with the hardware on it. It’s beefy and very well made. The rudder is an easy to obtain speed master in case you bend it. The strut has sealed ball bearings in it. All the parts are powder coated not painted. I will offer support on parts for this boat for as long as the buyer owns it. You can ask anyone on this forum, I go out of my way to help people. I’m going to include pics and a walk around video. I’m asking $1000 shipped in the us for this boat. It will come with two sets of revolectrix batteries and I’ll let the buyer decide what cell count he wants. If you have a new telemetry spektrum radio I will include the telemetry receiver and temp sensor already installed. If you don’t have a newer spektrum radio I would like to keep it. And if no one buys it, I won’t be sad! :)

Parts list:
27” carbon fiber Tfl mini zonda
Honey comb carbon inlay
Custom billet strut and rudder hardware
Speedmaster strut, machined for ball bearing drive
Speedmaster rudder
Abc 1616 prop (or prop of choice)
Tp power 3650 2900kv motor
Swordfish 220X (newer swordfish with logging)
Tapeless hatch seal system
Spektrum 6240 servo
Heavy duty custom made linkage rod
Billet high quality no slack rod ends
Billet servo arm
Carbon fiber:
Battery trays custom Cnc made
Motor mount
Servo mount
High quality cooling line
Custom made water pickup and rear topside exit with trim ring
Modded Fightercat antenna mount
Mbp collet
.187 flex
And I’m sure I left much more out