Results 1 to 6 of 6

Thread: Building a DF35, Looking for proper prop to rudder measurements.

  1. #1

    Default Building a DF35, Looking for proper prop to rudder measurements.

    I was wondering what I have to look for when installing my rudder.Alt1.jpg I hope my pic/drawing came through! If not, I'm looking for distance between prop tube and rudder, and from prop to outer edge of rudder. any help in this will be greatly appreciated! Thanks!
    SW26 V3 Green 35mph , Swifter Hydro 26. Delta Force 35. cars ,3 Rustlers 45-76 Mph.

  2. #2

    Default

    looks ok in pic.

  3. #3

    Default

    Thanks, but that's not my boat! LOL
    SW26 V3 Green 35mph , Swifter Hydro 26. Delta Force 35. cars ,3 Rustlers 45-76 Mph.

  4. #4

    Default

    Is the OP wanting the side offset of the rudder or the distance differences from the transom?


    .
    ERROR 604 - Caller's Buffer Is Too Small
    1. Ensure that your port is not configured to a mini plug
    2. If you are still having problems, contact someone

  5. #5

    Default

    It looks like he is after the side offset of the rudder to the center of the strut, and the front of the prop to the front of the blade.

    Larry
    Past NAMBA- P Mono -1 Mile Race Record holder
    Past NAMBA- P Sport -1 Mile Race Record holder
    Bump & Grind Racing Props -We Like Em Smooth & Wet

  6. #6

    Default

    Larry is correct, I remember something about the water cone and the effects. I'm just getting back into boating after 2yrs due to health issues and during that time lost all my notes due to computer failure. any help is appreciated.
    SW26 V3 Green 35mph , Swifter Hydro 26. Delta Force 35. cars ,3 Rustlers 45-76 Mph.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •