Results 1 to 2 of 2

Thread: Motor runs when losing signal from controller

  1. #1
    Join Date
    Apr 2018
    Location
    IN
    Posts
    3

    Default Motor runs when losing signal from controller

    Hey guys. I'm fairly new here and have a question. I have a Veles 29 and the motor has decided to run all by itself when I lose communication with the transmitter. It seems to happen when I get just out of range, then it wants to run in reverse until I pick up signal again. Also, I've been noticing an arc when I plug the second battery in before I turn on the ESC. Neither one of these issues seem normal and I don't remember this happening prior. Any ideas from some experienced RC guys?

  2. #2
    Join Date
    Nov 2008
    Location
    Ql
    Posts
    3,169

    Default

    Sounds like you need to set the failsafe on the receiver. When signal is lost the settings on all channels return to their original setting.

    All my boats arc when the batteries are plugged in. It is just the capacitors charging up on the ESC.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •