Results 1 to 9 of 9

Thread: P-Hydro prop recommandation

  1. #1
    Join Date
    Jun 2018
    Location
    Qc
    Posts
    4

    Default P-Hydro prop recommandation

    Hi,

    I have a new boat this year with the following setup

    Phydro, 4074 motor 2200kv, esc 180 amp. 2x 4s 4300mah in parallel.

    What prop would you recommand? I bought a x440/3 and a 442. Would you go with something else?

    I added a pic of my boat to give an idea of the hull.

    Thanks
    Attached Images Attached Images

  2. #2
    Join Date
    May 2017
    Location
    OK
    Posts
    1,464

    Default

    Seems like you can go bigger than that. At least an M445 or ABC 1816-17 on there. You have enough battery to get you through a heat. Looks like a great boat, enjoy that!

  3. #3
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,384

    Default

    If you can’t get an abc as suggested above, a Proboat Veles or ul-19 stock prop is not a bad start either. Great hobbies sells them.
    Nortavlag Bulc

  4. #4
    Join Date
    Jun 2018
    Location
    Qc
    Posts
    4

    Default

    You dont think its gonna overheat with a 445?

  5. #5
    Join Date
    Apr 2017
    Location
    QL
    Posts
    1,038

    Default

    Try the 442 firstly with 6 laps and test all temps .The 445 should be ok with your motor size and esc size. give the boat 4 fast laps and test all temps before trying 6 fast laps. also you might want a mojo racing turn fin .

  6. #6
    Join Date
    Jun 2009
    Location
    GA
    Posts
    595

    Default

    My Pickle ran a cnc m642 and always came back stone cold. The only reason for not propping up was for open water stability and I never gave it a turn fin. I'm going to try the UL-19 prop next as there really is no ABC option available from OSE.

    I forgot to mention that it is also running a 2200kv 3660 on 4s.
    Last edited by boredom.is.me; 06-08-2018 at 07:23 AM.

  7. #7
    Join Date
    Jun 2018
    Location
    Qc
    Posts
    4

    Default

    I also ordered cnc 442/3; cnc 444; octura m445 and m545. Gonna have some testing to do ��
    Last edited by Maxime20p; 06-08-2018 at 09:32 PM. Reason: Error

  8. #8
    Join Date
    Apr 2017
    Location
    QL
    Posts
    1,038

    Default

    If the hull needs a better turn fin try the mojo racing turn fin, very good.

  9. #9
    Join Date
    Jun 2018
    Location
    Qc
    Posts
    4

    Default

    I prefer straight fin. I like to run as scale as possible.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •