Results 1 to 4 of 4

Thread: M41 3/16 shaft upgrade installation questions

  1. #1
    Join Date
    Apr 2018
    Location
    AL
    Posts
    4

    Default M41 3/16 shaft upgrade installation questions

    I have a Traxxas DCB-M41 I bought the larger shaft upgrade, 3/16. The drive dog that came with the upgraded parts has 2 grub screws but the shaft it connects to has only one flat spot. Is there supposed to be another or just use one. Also should I use loctite on any of these locations?

    Thanks I advance.

  2. #2
    Join Date
    Aug 2015
    Location
    VA
    Posts
    435

    Default

    Use both set screws on the coupler and one on the drive dog.A little Loctite won't hurt. Mark is right, I thought it said coupler when I originaly answered this.
    Last edited by Revolt Flash; 06-02-2018 at 07:27 AM.

  3. #3
    Join Date
    Mar 2008
    Location
    Ca
    Posts
    974

    Default

    You only need 1 set screw on the flat and use blue loctite on both set screws.

    Mark

  4. #4
    Join Date
    Aug 2018
    Location
    ma
    Posts
    22

    Default

    2 holes 2 screws,,, use them both
    Also blue lock tight
    One should go on flat of shaft.
    A lot of heavy equipment Hydrolic pups come with 2 = extra strength.
    My opinion of corse

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •