Results 1 to 4 of 4

Thread: Refresh my Lipo charging memory

  1. #1
    Join Date
    Mar 2014
    Location
    Ma
    Posts
    1,951

    Default Refresh my Lipo charging memory

    It’s been a while.
    I have two revolectrix 5000 mah packs. 1-3c
    My charger is i306b 50 amp 1000 watt, with turnigy 1200watt 50amp power supply.
    I have parallel charge board.

    If I’m remebering things rite, my packs I can charge at 15 amps? And when I parallel charge I still stay at 15 amps?
    There's a hole at the center of earth where the rest of the world sinks but i stand still...

  2. #2
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default

    15 amps would be the max charge on them at 3c. It appears from your specs that your charger and power supply will put out 30 amps easily, so you could charge both of them connected with your parallel board up to 30 amps safely. I would back it down to around 15 amps for the pair if I were you though unless you were in a big time rush.
    Last edited by MADRCER; 04-28-2018 at 12:16 AM. Reason: more to add
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

  3. #3
    Join Date
    Mar 2014
    Location
    Ma
    Posts
    1,951

    Default

    Quote Originally Posted by MADRCER View Post
    15 amps would be the max charge on them at 3c. It appears from your specs that your charger and power supply will put out 30 amps easily, so you could charge both of them connected with your parallel board up to 30 amps safely. I would back it down to around 15 amps for the pair if I were you though unless you were in a big time rush.
    wait, so i can charge 2 packs at 30 amps?

    today i was charging at 15 amps, tho the charger said 15 amps. the power supply? said 5 amps.
    There's a hole at the center of earth where the rest of the world sinks but i stand still...

  4. #4
    Join Date
    Feb 2017
    Location
    na
    Posts
    726

    Default

    (2) 3s 5,000mAh packs in parallel on your board would be charged as one 3s 10,000mAh pack and 10 amps would be the 1c rate on this now technically one battery pack charge. If the packs specs say they can handle 1-3c charge rates then you can safely do a 30 amp charge if both are in parallel and are the same voltage when you start the charge cycle. I'm not sure why your charger reads 15 amps and the power supply reads 5 amps??
    TFL Zonda (124mph), Miss Geico Zelos 36 (108mph), Veles 29 (91mph), Zelos Twin 36 (90mph), Miss Geico 29v3 (83.5mph), Sonicwake 36 V2 (83mph), Blackjack 42 (81mph), TFL Pursuit (79mph), UL-19 (75mph), Sonicwake 36 (73mph), Motley Crew (47.5mph), AquaCraft Rescue 17

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •