Results 1 to 5 of 5

Thread: TFL CAUDWELL F1 H2o

  1. #1
    Join Date
    Sep 2017
    Location
    NY
    Posts
    9

    Default TFL CAUDWELL F1 H2o

    hi to everyone; i have a Caudwell F1 H2o, and after i replaced the Esc (to use 4, and 5S Lipo) Now i can't get the steering to respond at high speed, anytime i want to turn i have to reduce to less than half throttle. is there anything that i can do to fix this? other than going back to 3S.,

  2. #2
    Join Date
    Apr 2011
    Location
    CA
    Posts
    5,666

    Default

    Are you using a separate pack on relying on the BEC of the ESC?
    Maybe the drain is too much, servo is not getting enough juice? The BEC on your ESC may not do the job.
    Too many boats, not enough time...

  3. #3
    Join Date
    Aug 2017
    Location
    OZ
    Posts
    686

    Default

    Quote Originally Posted by Maxnitrox View Post
    hi to everyone; i have a Caudwell F1 H2o, and after i replaced the Esc (to use 4, and 5S Lipo) Now i can't get the steering to respond at high speed, anytime i want to turn i have to reduce to less than half throttle. is there anything that i can do to fix this? other than going back to 3S.,
    Just thinking outside the box, is the lack of turning due lack of voltage or perhaps the servo is not up to the task at higher speeds? Perhaps a servo with more muscle.

  4. #4
    Join Date
    Sep 2017
    Location
    NY
    Posts
    9

    Default

    Oook, this is a Phony case because at low speed work perfectly, i use the same Esc brand and capacity in all my boats so the only thing that change is the servo, (that will takes the *bec out of the equation, besides that if am using a 4s instead of 3s, volt on *bec should be more Stable not less), Next Step is to change the steering servo and i let u guys the Outcome ,,,and Thanks u Guys 4 your fast response.,

  5. #5
    Join Date
    Sep 2017
    Location
    NY
    Posts
    9

    Default

    ok, am Back from the pond, and after few speed run i noted something i didn't try before, the boat turn ok to the left but not to the right, Soo went ahead and change steering servo, and is the same situation ��, so at this point am sure is not the servo or *bec. because it respond ok to the left Turn , i even lower the Drive Sistem but no look,,,as far as i know am second person with this boat in the Bx. but he haven't change Esc. jet, Any other advice?.,

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •