Results 1 to 3 of 3

Thread: programming Orion esc help

  1. #1
    Join Date
    Jan 2013
    Location
    MA
    Posts
    90

    Default programming Orion esc help

    hello,

    I am trying to program an Orion vortex 80amp esc. When I first plugged it in it made a series of beeps, stopped beeping and immediately went to full throttle. When I plugged it did it enter programming mode? and the esc remembered the neutral throttle position as full throttle? I have tried several times to get the esc to enter program (per instructions) mode by holding the controller in full throttle position but that doesn't seem to work. Any help would be greatly appreciated.

  2. #2
    Join Date
    Apr 2017
    Location
    QL
    Posts
    1,038

    Default

    you might need to Reverse the throttle in transmitter , then try again.

  3. #3
    Join Date
    Jan 2013
    Location
    MA
    Posts
    90

    Default

    I figured it out....had the plugs for servo and receiver swapped, which is why i couldn't follow programming directions...thanks!

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •