Results 1 to 8 of 8

Thread: Power plant for 21" Off Shore

  1. #1
    Join Date
    May 2010
    Location
    Mi
    Posts
    254

    Default Power plant for 21" Off Shore

    I have a BBY 21" Oval Master Off shore and need some advice on powering this one. For a boat this size is a 2S pack suitable or should I run a 3Spack? I would prefer to use a 2S pack and a Leo 3650 2290KV. Would this be a good combination or should I consider a different KV? Originally this boat used a 540 size car motor. I was planning to use a Feigao 540 size motor with 4761 KV but I think it's too much motor for it even with a 2S pack.
    Need to make a decision before I start the build.
    cheers

  2. #2
    Join Date
    Apr 2017
    Location
    QL
    Posts
    1,038

    Default

    i think running this 2290 kv motor on 2s is not going to supply great rpms, this kv amount is more suited to 4s power so maybe you should consider running 3s with this 2290 motor or even go abit higher on the kv,s . you could try this 2s combo and go up to 3s if needed, just make sure the esc is capable of handling 3s power.

  3. #3
    Join Date
    Mar 2017
    Location
    VI
    Posts
    371

    Default

    The leopard 3674 2650 or the 3300 3674 motor would be a better motor in my opinion for 2s and 3s. It will be more efficient than the 3650.

    More speed with similar runtime or more runtime and similar speed.

    If you are using a 1/8 shaft a octura x435 should be good for decent speeds in that size boat.

    An ose raider 150 if you can find one would be a good ESC.

  4. #4
    Join Date
    Jan 2013
    Location
    Ga
    Posts
    1,358

    Default

    3674 is to much motor for that boat. I personally would get a Leo2860 or Tp2940 in the 4000kv area for 2s.what are your goals speed or longer runtime

  5. #5
    Join Date
    May 2010
    Location
    Mi
    Posts
    254

    Default

    I have to agree the 3674 would be too large for a 21" hull. I built one of these several years ago and ran it with a trinity 540 car motor so anything in a 540 size motor which would be 3650 size or maybe a tad smaller.
    I did take a look at the Leo 2860 and it might fit the bill. the Feigao 4761KV motor is obviously a bit too hot for that boat and since I'm not going to be racing it as there are no clubs anywhere near where I live, It will be run in the river in front of my house. So the answer is as combination of speed and run time.
    I suppose I could use a 3S pack but with the older boat I used a 7 cell Nimh with that 540 car motor.

  6. #6
    Join Date
    Jan 2013
    Location
    Ga
    Posts
    1,358

    Default

    I am using a Tacon 2860 2550kv on 3s in a mini sniper with a m435/3 prop and getting 38mph.

  7. #7
    Join Date
    Aug 2010
    Location
    uk
    Posts
    2,887

    Default

    Yep a 3674 motor is to much motor in a 21" boat, that's the same as putting a 3674 motor in an Atomic Barbwire XL (also 21" ).

  8. #8
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,401

    Default

    Quote Originally Posted by jim82 View Post
    I am using a Tacon 2860 2550kv on 3s in a mini sniper with a m435/3 prop and getting 38mph.
    I ran the same setup in a DF 23 but on 4s. It was a hoot!!! I'm building another because I missed it so much after selling. Same setup but the Leopard 2860 2550kv.
    Nortavlag Bulc

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •