Results 1 to 7 of 7

Thread: Pacer 5 minute +15 minute epoxy ?

  1. #1
    Join Date
    Jan 2011
    Location
    ON
    Posts
    497

    Default Pacer 5 minute +15 minute epoxy ?

    Hi all i noticed my 5 and 15 minute epoxy resin has start to crystalize i heard some one mention you can heat it up with a heat gun or put the resin bottle in hot water to thin it out. My ? here is by doing that with if affect the epoxy's bonding ability and long term strength ? Regards Andris Golts ?

  2. #2
    Join Date
    Apr 2007
    Location
    MI
    Posts
    3,117

    Default

    Nope... I have done this in the past with no ill affects on the epoxy.

  3. #3
    Join Date
    Apr 2017
    Location
    QL
    Posts
    1,038

    Default

    Yes use by date is up.

  4. #4
    Join Date
    Apr 2007
    Location
    ON
    Posts
    9,401

    Default

    I tried some 10 year old 30 minute epoxy the other day and it worked fine.
    Nortavlag Bulc

  5. #5
    Join Date
    Apr 2017
    Location
    QL
    Posts
    1,038

    Default

    normally the Hardener crystalizes i have noticed with old z-poxy resins.

  6. #6
    Join Date
    Apr 2007
    Location
    MI
    Posts
    3,117

    Default

    De-crystalize it with heat. ie... hot water, microwave, hairdryer

    Then mix up a test batch and make sure it cures. If it's stored properly and it still cures in the correct time; I wouldn't worry too much about dates.

    Later
    Mike

  7. #7
    Join Date
    Jan 2011
    Location
    ON
    Posts
    497

    Default

    Thanks to all for the information. Regards Andris Golts

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •